+33.(0)7.49.31.28.30
My account
>
My cart
No Items
>
logo-www.powder-service.com
» » » » Spray paint Full-Gloss RAL 9018 Papyrus white - Aerosol 400 ml
RAL 9018  Full-Gloss spray paint available to buy on Powder Service
See larger image
Share :

Spray paint Full-Gloss RAL 9018 Papyrus white - Aerosol 400 ml

Reference -PS919018B

Spray Paint Can RAL 9018 Full-Gloss. Professional quality. Excellent covering power. High resistance to yellowing, streaking and impact. Fast drying. Excellent corrosion resistance. Precise tinting.

11.50€
Quantity : 
+
-
Dispatched within 8 days
Add to cart
Ask an estimate
Get a discount depending on the quantity ordered :
Par lot de
6
11.50€
Par lot de
12
10.70€
Par lot de
24
10.00€
Par lot de
48
9.00€
Par lot de
96
8.00€
description

Touch up missing paintwork with POWDER PAINT TOUCH-UP STICK.

 

Click here to download the SAFETY DATA SHEET

 

HIGH-QUALITY SPRAY PAINT FOR INDUSTRY AND PROFESSIONAL USERS

PRODUCT: QUICK-DRYING ACRYLIC AEROSOL NOMINAL CONTAINER: 520 ml.

CODE: DIFFERENT COLOURS NET CONTENTS: 400 ml.

 

  1. PHYSICO-CHEMICAL CHARACTERISTICS
  • Physical state: liquid pigmented with HYDROXYLATED acrylic resin.
  • Chemical composition: acrylic aerosol, modified without lead, cadmium or chlorides.
  • Solubility: insoluble in water.
  • Drying time: Dust-free: 10 minutes (20ºC), touch-dry: 30 minutes, through-dry: 48 hours.
  • Gases: ether derivatives (Aerosol)
  1.  RESISTANCE
  • No change in colour over time.

·Resistant to resin yellowing.

  • Motor oils, detergents, petrol and petrol derivatives.
  1.   FEATURES 

·High surface hardness.

·Highly resistant to scratches, impact, etc.

·Strong adhesion to substrate.

·Excellent covering power.

  1. AREAS OF USE
  • Widely used to remove scratches and defects from aluminium profiles and joinery.

·For reworking small and large production runs of industrial parts.

  • For touching up uncovered areas in industrial paint lines, in both powder and liquid form.
  • Very good colour adjustments in most cases.
  1. SUBSTRATE, SUPPORT 

·On iron, aluminium, steel, glass and plastics.

  • It is recommended to apply in thin coats, at least 2 or 3 coats, 40 microns.
  1.  SUBSTRATE PREPARATION
  • Remove any grease, oils, oxides or old paint residues. If necessary, first sand with P 360 waterproof sandpaper to prepare the surface for painting.
  • Apply the spray from a distance of 15 cm.
  • For bare metal, we recommend first applying our GREY ACRYLIC PRIMER`.
  1. OPTIONAL PRECAUTIONARY ADVICE
  • Always apply in well-ventilated areas.
  • Vapours can be toxic, so it is advisable to take extraction measures or wear a mask.
  • Avoid spraying anything likely to produce sparks. FLAMMABLE.
  1.  STORAGE  
  • In dry places. Protect from sunlight or any other source of heat.

The above technical information is based on our current knowledge: the customer-user is always advised to carry out checks to ensure that the results are optimal and those desired.

Back to top